Home > Products > Tools and Accessories

Tools and Accessories

  • Element Change Spanner FM0027
  • Tee Handle Holder FM0028
  • Return Line Pressure Gauge FM0063
  • Live Sample Tube Kit FM0061
Element Change Spanner FM0027

Purpose designed specifically for use in the element change procedure when servicing all Filter Technology Australia filter systems.

Manufactured from aluminum this item provides a cost effective, safe and efficient tool for the task.

The ring spanner suits the compression nut whilst the opposite end is equipped with a gauge to assist the maintainer in locating the compression nut during the tensioning process.

Brochure

  Tee Handle Holder FM0028

Purpose designed specifically for use in the element change procedure when servicing all Filter Technology Australia filter systems.

Manufactured from steel and powder coated black, this item provides a cost effective, safe and efficient tool for holder the filter assembly during reassembly.

Simply clamp the tool in a vice as shown and then position the filter assembly with the tee handle engaged into the tool.

Brochure

  Return Line Pressure Gauge FM0063

Designed specifically for testing Return Line Pressure when installing Filter Technology Australia fixed filtration systems.

It is critically important to ensure Return Line pressure does not exceed installation specifications. Failure to do so may result in reduced or no oil flow and therefore greatly reduced filtration efficiency.

The gauge reads in both psi and bar graduations up to a maximum working pressure of 10 Bar (145 psi).

Application
1. Select suitable length test hose.
2. Attach to pressure gauge.
3. Connect assembly to inline test port on filter system (where equipped ).
4. Observe indicated pressure.

Description Part No
Pressure Gauge 0 - 10 bar FM0063
Hose 0.5 m FMH9250
Hose 1.0 m FMH9251
Hose 2.0 m FMH9252
Hose 4.0 m FMH9253
Hose 6.0 m FMH9254
Hose 8.0 m FMH9255
Hose 10.0 m FMH9256

Brochure

  Live Sample Tube Kit FM0061

The FTA Live Sample Tube Kit is a single-use item which ensures that your samples are taken cleanly, avoiding spillage and contamination.

Features

  • Individually sealed to prevent contamination during storage.
  • Kit contains instruction sheet 'Tips for Taking a Valid Sample'.
  • Suitable for CAT® style pressurised sample valves.
  • Fits most popular sample bottles.
  • Minimises contamination during the sampling process.
  • Maximises the value of taking the oil sample.
  • Single use only to ensure cleanliness of sample.

Brochure

 
© Filter Technology Australia 2016