FM50432 Heavy Duty Mobile Filtration Buggy

FM50432 Dimensions
  Metric US
Height 1390 mm 54.7"
Length 750 mm 29.5"
Width 670 mm 26.3"
Weight 152 kg 335 lb
Max pressure 5 bar 72 psi
Recommended operating pressure 3 bar 43 psi

PDF Version

features:

  • Electrical 24 volt control circuit
  • Fitted with pressure relief valve
  • Pressure gauge
  • Hour run meter
  • Element change light
  • Pressure differential switch
  • Emergency stop button
  • Seven metres of hosing (3.5m suction and 3.5m return)
  • 3/4" quick release couplings
  • Two wheeled heavy duty trolley
  • Mobile and portable.

Filters

  • 4 x FM3204 Filters.

Suitable for all

  • Engine oils
  • Hydraulic oils
  • Diesel fuels
  • Most solvents (not suitable for water).

FM50432 buggies are fitted with FM3204 Filtration Units for use with either diesel or oil applications.

Function

Oil Applications:

FTA Buggies are typically used for small hydraulic reservoirs on gearboxes, final drives, blow and injection moulder or wherever hydraulic oils are used. Their kidney loop system and quick release couplings allow easy movement between machines in industrial sites allowing machinery to be filtered while the machine is still in service. They can also be used to filter new oil from the drum into the machine.

Fuel Applications:

FTA Buggies can be used to filter fuel contaminated with dust, rust, airborne contaminants and algae in low volumes where the tanks have been treated with a biocide. These buggies can also act as a remote filling station where fuel cleanliness cannot be guaranteed.

 

 
© Filter Technology Australia 2016